Jump to content

Recommended Posts

Posted

That's really two different rods to me.  I will say that the Duckett Ghost seems to be nice and light in that price range althought I don't own any.  Good luck

  • Super User
Posted

I use to throw both those baits, & more on a heavy lews rod, years ago. You can do it. I never had a problem. I really don't know what rod to recommend. ***, used, or powell diesel series are decent sticks, with a mh you could make it work..

Posted

How heavy of baits and what type of cover?  I'd be looking for a modestly priced M or MH / Mod. Fast rod for the traps and a higher end second hand M or MH / F for the plastics. If you have to have one rod, a MH/F is pretty versatile.  

  • Super User
Posted

Shimano Compres are really nice sub $100 rods, and Clarus are also really nice sub $80 rods.

  • Super User
Posted

Goto your local academy & look at Castaway, All Star, & H2O  ;)

  • Like 2
  • Super User
Posted

Veritas 2.0

As stated above, should be 2 separate rods or might get by with one based on lure weight. Med. action.

Posted

Falcon bucoo 7ft medium/heavy moderate/fast trap caster. Works great with rattle baits and would be fine for plastics even though it's moderate/fast. One of my favorite rods.

Posted

I would go for a 7' M/fast, assuming you are fishing in light to no cover. Get a Fenwick that fits your price range, they are great rods.

  • Super User
Posted

To me they are 2 different rods, but for 1 rod go with a 7' medium heavy power with a fast action.

  • Like 1
Posted

Thanks for the responses guys.

From what I can tell a couple of your responses seem to point towards these being two different rods.

Would someone like to elaborate on why I should use seperate rods for crankbaits and plastics?

  • Super User
Posted

Thanks for the responses guys.

From what I can tell a couple of your responses seem to point towards these being two different rods.

Would someone like to elaborate on why I should use seperate rods for crankbaits and plastics?

 

You see a lot of technique specific rods these days but when you really think about it there are two categories rods fall in, and that is jig and worm with the other being crankbaits. The reason you use separate rods for cranks and plastics is because both require quite different actions, in fact they are exact opposites. For plastics you want a rod with a fast or extra fast action that can drive a large diameter single hook the mouth of the fish, so you have a small tip section that transitions quickly into backbone for power. With crankbaits you need a rod with a softer action that will give when a fish runs because treble hooks don't always penetrate, they often are caught in just the skin inside the mouth and if your rod is too still like a jig and worm rod, it will actually pull the small treble hooks out when the fish is skin hooked. Think of it like this, take a crankbait and hook it to a stump and then grab your line and pull, what is going to happen is either you break the line, or you pull the bait free. Now hook the same crankbait to a green, thin willow branch and then just like before, grab the line and pull, what you'll find is that you will be pulling and you aren't going to get free the crankbait or break your line because you pull and the willow branch is going to give and that is why you use a softer action rod for crankbaits, in order to fight the fish and when he surges, he'll just bend the rod as there will be constant pressure to hold the fish yet plenty of give to keep him from pulling out the hooks. There are times when you'll use a stiffer rod for cranks, like ripping lipless baits through grass, a soft rod won't let you do that too well and rod manufacturers have responded by making medium heavy, moderate fast rods, they will allow you to rip a bait free from weeds but still will flex deeper than a fast action rod when a fish is hooked but those rods are still to soft for fishing worms.  

  • Super User
Posted

The BPS Extreme rods are nice and retail for $100, and sometimes go on sale for $70-80.

I also recommend the Fenwick HMG rods. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.